Eastman Heavy Machinery
25
Chapter 6 – Workplace Inspection
Do Not Operate Unless:
You learn and practice the principles of safe machine operation contained in this operator's manual.
1
Avoid hazardous situations.
2
Always perform a pre-operation inspection.
3
Always perform function tests prior to use.
4
Inspect the workplace.
Know and understand the workplace inspection before going on to the next section.
5
Only use the machine as it was intended.
Fundamentals
The workplace inspection helps the operator determine if the workplace is suitable for safe machine
operation. It should be performed by the operator prior to moving the machine to the workplace.
It is the operator's responsibility to read and remember the workplace hazards, then watch for and avoid them
while moving, setting up and operating the machine.
Workplace Inspection
Be aware of and avoid the following hazardous situations:
·
Drop-offs or holes
·
Bumps, floor obstructions or debris
·
Overhead obstructions and high voltage conductors
·
Hazardous locations
·
Inadequate surface support to withstand all load forces imposed by the machine
·
Wind and weather conditions
·
The presence of unauthorized personnel
·
Other possible unsafe conditions
