Eastman Heavy Machinery
10
Do not climb down from the platform when raised.
Keep the platform floor clear of debris.
Attach the platform entry chain or close the entry gate before operating.
Do not operate the machine unless the guard rails are properly installed and the entry is secured for
operation.
Collision Hazards
Be aware of limited sight distance and blind spots when driving or operating.
Be aware of the extended platform position when moving the machine.
The machine must be on a level surface or secured before releasing the brakes.
It is recommended that operators wear an approved hard hat when operating the machine.
Check the work area for overhead obstructions or other possible hazards.
Be aware of crushing hazards when grasping the platform guard rail.
Observe and use the color-coded direction arrows on the platform controls and platform decal plate for
drive and steer functions.
No stunt driving or horseplay while operating a machine.
Do not lower the platform unless the area below is clear of personnel and obstructions.
Limit travel speed according to the condition of the ground surface, congestion, slope, location of
personnel, and any other factors which may cause collision.
Do not operate a machine in the path of any crane or moving overhead machinery unless the controls
of the crane have been locked out and/or precautions have been taken to prevent any potential
collision.
Crushing Hazards
Keep hands and limbs out of scissors.
