manualshive.com logo in svg

EASTMAN BLUE JAY-5H, Инструкция по эксплуатации и иллюстрированный список запасных частей, Страница: 51 / 52

Поделиться
Скачать
EASTMAN BLUE JAY-5H Скачать руководство пользователя страница 51

51

Form CR-50-0433

Ply Counter Full

When the ply counter reaches the preset counter value, the
following screen will flash and the audio indicator will beep.
Pressing the CLEAR key will reset the counter to '000' and
return to idle mode.

Sharpener Counter Full

When the sharpener counter reaches the sharpener preset
counter value, the following screen will flash and the audio
indicator will beep.Press the SHARP ON key  to initiate
sharpening mode.

NOTE: The value of the sharpen counter is tracked

internally and cannot be read or changed. It is
reset to zero any time the SHARP ON key is
pressed.

Remote Lift Switch

If the control box is powered up with the remote lift switch
(typically the Blue-Jay lift switch on the Pull-Off machine
joystick control box) on, the following message is displayed.

Hand Held Remote

The hand held remote consists of two switches, START and
RETURN. Pressing the start button on the remote will
alternate between two functions. If the fabric clamp is open
and START is pressed, the clamp will close and the cut
cycle will begin. If the fabric clamp is closed and START is
pressed, the fabric clamp will open.

The RETURN button aborts the cut cycle and issues a stop
command to the Pull-Off Machine. If an optional remote
Pull-Off stop device connected to the control box through
the remote phone jack is activated, the display will output:
Pressing any key on the keypad other than START CUT or

FLAW CUT will issue a stop command to a connected  Pull-
Off Machine.

System Configuration

Holding down the Start key during power up of the machine
enters the System Configuration screen.Certain System
parameters and preferences can be set.

System Options:

Pressing '0': Toggles the System type to LIFT / NO LIFT. No

lift is typically used for  M9000 Easipull Sys-
tems.

Pressing '1': Toggles the Pull-Off  Fast Signal interface (aka

Rocket Option) ON or OFF. Note that an at-
tached PullOff  machine must be off compat-
ible type.

Pressing '2': Toggles the Clamp Bar Operation between N/

O (Normally Open) and N/C (Normally
Closed). This refers to how the pneumatic
plumbing is configured for the Clamp Bar.
Generally this is set to N/O when the machine
is connected to a PullOff Machine and N/C
when stand-alone or connected to an Easipull
system.

Pressing '3': Go to User Preferences Screen.
Pressing '4': Exits the configuration Screen.

User Preferences

Pressing 3 from the system configuration screen enters the
user preferences option.

Pressing '0': Toggles the BackLight on the display ON/OFF.
Pressing '1': Adjust the display contrast, outlined below.
Use the +/- keys to increase/decrease contrast.

Pressing '2': Adjust Beeper Volume for key press and status
signals. Toggles LOW/MED/HIGH/OFF. Press return to
exit the user preferences area.

> > > > > > > > > > < < < < < < < < < <
* PLY COUNTER FULL *
press ‘CLEAR’ key
> > > > > > > > > > < < < < < < < < < <

System Display Messages and Notes

> > > > > > > > > > < < < < < < < < < <
SHARPEN COUNTER FULL
press ‘SHARPEN ON’ key
> > > > > > > > > > < < < < < < < < < <

REMOTE LIFT SWITCH
D E T E C T E D  " O N "
RELEASE REMOTE LIFT
SWITCH TO CONTINUE

> > > > > > > > > > < < < < < < < < < <
* REMOTE RETRN ON *
* PULL - OFF STOP ON *
> > > > > > > > > > < < < < < < < < < <

+ to increase
  Contrast
- to descrease
RETURN TO EXIT...

[0] Lift Type: Lift
[1] Rocket Option: OFF
[2]  Clamp Mode: N/O
- [3] More    or [4] Exit                                  -

[0] Backlight: ON
[1] Adjust Contrast
[2] Beeper: ON/MED

RETURN TO EXIT...

Содержание BLUE JAY-5H





















































Отзывы:

Нет отзывов