EASTMAN
Form C-1572
Illustrated Parts List
Your Eastman Straight Knife has been carefully designed
to provide many hours of trouble-free operation. The com-
prehensive exploded parts illustrations have been carefully
prepared to enable you to easily order replacement parts.
Replacement parts for this machine may be ordered
through your nearest Eastman Machine Company repre-
sentative or directly from the Eastman factory.
Note:
Please specify the model and serial number of your
machine when ordering parts. Always specify class num-
ber and serial number when ordering parts for faster, more
efficient service.
Exploded Parts Illustrations
The exploded parts illustrations and parts lists in this sec-
tion have been divided into major assemblies as follows:
Motor Assemblies
Single-Phase, Single-Speed
Pages 22, 23
Three-Phase, Single-Speed
Pages 24, 25
Front Bearing Housing Assembly
See pages 26 and 27.
Sharpener Housing Assembly
Front view, see pages 28 and 29.
Rear view, see pages 30 and 31.
Lower Gear Bracket Assembly
See pages 32 and 33.
Note:
Four different abrasive belt grits (designed to pro-
vide you with a selection of edges) may be ordered for this
machine. See pages 17 and 18 of this manual for more
information.
Standard and Baseplate Assembly
See pages 34 and 35.
Note:
Knife slides and standard heights indicated on pages
34 and 35 are based on the length of the knife and do not
refer to physical dimensions. Thus, a 6" knife slide accom-
modates a 6" knife. Ordering information and part numbers
for knives may be found on pages 10 and 11.
FASTENERS REQUIRED TO ASSEMBLE
MAJOR COMPONENTS
PART NO. NO. REQ'D
DESCRIPTION
Class Class
627 629
4C1-99
3
3
Sharpener Hold-Down Nut
4C1-150
1
1
Sharpener Hold-Down Nut
4C1-179
4
4
Front-to-Rear Bearing Nut
4C2-2
1
1
Plate Bolt Nut
20C3-29
0
4
Front-to-Rear Bearing Screw
20C3-35
4
0
Front-to-Rear Bearing Screw
20C13-96
4
0
Standard-to-Bearing Screw
24C4
1
1
Plate Bolt
20
