Eastman Industries HM19H-4 Скачать руководство пользователя страница 8

Страница: 8 / 33

Keep mower free of grass, leaves or other debris build-up. Clean oil or fuel
spillage on the mower. Allow mower to cool before storing.

Stop and inspect the mower if you strike an object. Repair, if necessary,
before restarting.

Never attempt to remove grass or debris from mower while the engine is
running.

Cutter disc components are subject to wear, damage and deterioration, which
could allow objects to be thrown. Frequently check components and, when
necessary, replace with Eastman Industries’ recommended parts.

10.

Mower blade is sharp and can cut. Wrap the blade or wear gloves, and use
extra caution when servicing it.

11.

Do not change the engine governor setting or overspeed the engine.

12.

Maintain or replace safety and instruction labels as necessary.

WARNING:

In order to prevent accidental starting when setting up, transporting,

adjusting or making repairs, always disconnect spark plug wire and place wire
where it cannot contact spark plug.

CAUTION:

Muffler and other engine parts become extremely hot during

operation and remain hot after engine has stopped. To avoid severe burns on
contact, stay away from these areas.

Consult the engine manual for more complete instructions
regarding engine maintenance and operation.

Содержание HM19H-4


































Результаты поиска

Содержание HM19H-4

Отзывы:

Eastman Industries HM19H-4, Руководство оператора, Страница: 8 / 33

Результаты поиска

Содержание HM19H-4

Отзывы: