Eastman Industries HM19H-4 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 33

Eastman Industries HM19H-4 Скачать руководство пользователя страница 4

4

This lawn mower is capable of amputating hands and feet and throwing objects.
Failure to observe the following safety instructions could result in serious injury or
death.

General Operations

1.

Read, understand and follow all instructions on the machine and in the
Manual. Be thoroughly familiar with the controls and the proper use of the
mower before starting.

2.

Do not put hands or feet near or under rotating parts.

3.

Only allow responsible individuals, who are familiar with the instructions, to
operate the mower.

4.

Clear the area of objects such as rocks, toys, wire, bones, sticks etc., which
could be picked up and thrown by the blade.

5.

Be sure the area is clear of other people before mowing. Stop the mower if
anyone enters the area.

6.

Do not operate the mower when barefoot, wearing open sandal or regular
shoes. Always wear heavy boots or substantial footwear.

7.

Do not pull mower backwards unless absolutely necessary. Look down and
behind before and while moving backwards.

8.

Do not operate the mower without proper inspection of the safety and
protective devices.

9.

Read the Operator’s Manual for proper operation and installation of
accessories. Only use accessories approved by Eastman Industries.

10.

Shut the engine off when crossing gravel drives, walks or roads.

11.

Shut the engine off whenever you leave the equipment.

12.

Shut the engine off and wait until the blade comes to complete stop before
cleaning the mower or unclogging grass and debris.

13.

Mow only in daylight or good artificial light.

14.

Do not operate the mower while under the influence of alcohol or drugs.

15.

Never operate the mower in wet grass. Always be sure of your footing; keep a
firm hold on the handle and walk; never run.

16.

If the equipment should start to vibrate abnormally, stop the engine and check
immediately for the cause. Vibration is generally a warning of trouble.

17.

Always wear safety goggles or safety glasses with side shields when operating
mower.

«
...
2
3
4
5
6
...
»

Содержание HM19H-4


































Отзывы:

Нет отзывов