Eastey SB-2 EX-Auto, Руководство пользователя

Страница: 15 / 59

Installation 15
Optional Entrance and Exit Roller Tables
The optional infeed and exit roller tables available for the case taper are identical and
therefore interchangeable. If they have not been installed from the supplier or have
been removed for shipping, install them as follows.
1. Temporarily loosen socket head cap screws at the locations shown in the
following illustration.
2. Align the keyhole slots in the table flanges with the loosened cap screw heads
and position the end table so rollers are level with the case taper rollers.
3. Re-tighten cap screws loosened in the first step to secure table.
Next Steps
Follow instructions in the Operation section for instructions to load the tape cartridges in
the upper and lower tape heads.
If tape heads have not been loaded with tape, load the upper and lower tape heads with
tape. (One roll each; follow instructions provided in the Tape Cartridge User Guide.)
Refer to the Adjustments section for instructions to make necessary height and width
adjustments that must be made for operation of the box taper.
Refer to the Operation section for instructions to power up, operate, and shut down the
machine.
Socket Head
Cap Screws
Socket Head
Cap Screws