Introduction 11
Specifications
Table 1 Machine Dimensions
Model
Machine Dimensions
Chamber Dimensions
Conveyor
Floor Shipping
Number
Width
(A)
Height
(B)
Length
(C)
Width Height Length Width
Nominal
Length
Overall Weight Weight
ETB3012
45 in.
114 cm
67 in.
170 cm
59 in.
149 cm
30 in.
76 cm
12 in.
30 cm
39 in.
99 cm
30 in.
76 cm
59 in.
149 cm
1200 lbs.
544 kg
1300 lbs.
589 kg
ETB3020
45 in.
114 cm
75 in.
190 cm
59 in.
149 cm
30 in.
76 cm
20 in.
50 cm
39 in.
99 cm
30 in.
76 cm
59 in.
149 cm
1250 lbs.
566 kg
1350 lbs.
612 kg
Table 2 Standard Power Requirements
Voltage / Phase
Standard Power
Designator
Volts Amperes Phase
V2
220
50
3
V6
480
25
3
Explanation of Model Numbers
•
E = Manufactured by Eastey, packaging group division of Engage Technologies.
•
T = Tunnel
•
B = Bundler
•
_ _ = 30 — First two digits indicate the nominal width of the chamber opening
and conveyor belt in inches: Nominal width of the conveyor belt and chamber
opening is 30 inches.
•
_ _ = 12 or 20 — The next two digits (preceding the dash) indicate the nominal
height of the chamber opening in inches: 12 or 20-inch chamber opening heights
are available.
•
V2 or V6 = Voltage and Phase, 220V 50A single-phase or 220V 25A three-phase
are available.
Example
:
- Model number ETB3020-V2-nnnn: ETB indicates that the model is an Eastey
Shrink Tunnel Bundler. 3020 indicates the chamber width is 30 inches (chamber
and conveyor width are approximately the same) and chamber height is 20
inches. (Conveyor length and machine length will be 20 inches longer than the
chamber length, figure twelve inches before the infeed/entrance and eight inches
