Eastey EC Series, Руководство пользователя, Страница: 21 / 39

Adjustments 21
Adjustments
Shut off power and disconnect electrical connections before making any adjustments.
Height Adjustment and Leveling
All four legs at the corners of the conveyor are adjustable for height and leveling, and
two mechanisms allow for height adjustment: threaded-rod legs and leg-extension angle
brackets.
Threaded-rod legs: threaded-rod legs are adjustable for their total length (less
approximately ½ inch of threads required to secure the legs in the bottom of leg-
extension angle brackets) and provide for fine adjustment to level the conveyor at the
required conveyor height.
Leg-extension angle brackets: Extending or retracting the leg-extension angles
provide five inches (5”) additional height when extended, or less five inches (5”) when
retracted. When extending the leg-extension angles, it is recommended to reposition the
leg brace strap for stability. See the illustrations on the following page.
Raising or Lowering by Small Increments or Leveling the Conveyor
For fine-adjustment of the leg length for fine adjustment of height or leveling the
conveyor, first loosen the 1”-8 UNC standard nut, if applicable, and then twist the
threaded-rod leg into or out of the conveyor leg angle bracket.
Note: An open-end wrench or channel-style wrench with a 1-½”
opening is required for the 1”-8 UNC standard nuts.
Lower
Raise Lower Raise
Lock Unlock Lock Unlock
1”-8 UNC Nut