HD-TVI DVR User Manual
27
automatically”. Then the device will distribute IP address, subnet mask, and gateway IP
and DNS server.
If you want to configure your own settings, disable “Obtain an IP address automatically”
item and input the IP address, subnet mask, gateway IP and DNS server.
If you connect internet through PPPoE, disable “Obtain an IP address automatically”
item and check PPPoE checkbox and then enter username and password. Once the setup
is completed, your DVR will automatically dial up into your network.
⑤
Test the effectiveness of the network by clicking “Test” button after you set up the
network.
⑥
If the network is well connected, please click “Apply” button to save the setting.
4.6.2 Sub Stream
To set up sub stream:
①
Go to Main Menu
Setup
Network
Sub Stream interface. Refer to Fig 4-25.
②
Select fps, resolution, quality, encode and max bit rate.
③
Select “All” to set the same settings for all channels.
Fig 4-25 Network Configuration-Sub Stream
4.6.3 Email
To set up Email:
①
Go to Main Menu
Setup
Network
Email interface. Refer to Fig 4-26.
Parameter
Meaning
FPS
Range from: 1-25
Resolution
Support CIF
Quality
The quality of the clients’ image. The higher the value is, the clearer the
record image. Six options: lowest, lower, low, medium, higher and highest.
Encode
VBR and CBR
Max bit rate
Range from: 256~1792kbps