HD-TVI DVR User Manual
6
Rear Panel for 32 CH
2.4 Remote Controller
It uses two AAA size batteries.
Open the battery cover of the Remote Controller.
Place batteries. Please take care of the polarity (
＋
and
－
).
Replace the battery cover.
Key points to check in case the remote doesn’t work.
1. Check batteries polarity and the remaining charge in the batteries.
2. Check IR controller sensor for any masking.
3. Check the ID of the remote with respect to the DVR.
If it still doesn’t work, please try using a good known remote, or contact your dealer.
Operation processes with remote controller to control multi-DVR
The default device ID of the DVR is 0. It’s not necessary to reset the device ID when a remote
is to be used to control a single DVR. However when controlling multiple DVRs with multiple
Name
Descriptions
MIC IN
1CH MIC input
USB
To connect external USB devices like USB mouse or USB storage device
LAN
Network port
HDMI
HDMI port. Connect to high-definition display device
VGA
VGA port. Connect to monitor
HD TVI VIDEO IN
(HD-TVI signal) 1080P/720P, (analog signal) 960H/D1 video inputs
AUDIO OUT
Audio output, connect to the sound box
AUDIO IN
Audio inputs
K/B
Connect to keyboard; A is TX +; B is TX-
P/Z
Connect to speed dome; Y is TX +; Z is TX-
GND
Grounding
ALARM IN
Alarm inputs for connecting sensors
ALARM OUT
Relay output. Connect to external alarm
E-SATA
Connect to external SATA HDD for backup