background image

 

    microBrute Modulator 

                                                                         

 

 

 May 2010, Rev 1

 

− 15 − 

© 2010 Eastern Voltage Research, LLC 

microBrute Modulator Instruction Manual 

Electronics Kit Return Policy 

If  you  feel,  for  any  reason,  that  you  will  have  difficulty  building  any  kit-based  product  purchased  from  us  (and  you  cannot  get 
assistance  from  a  friend),  you  can  return  it  for  a  refund  (minus  shipping  costs)  provided  a  Return  Authorization  (RA)  number  is 
obtained first from us by email. The items must be returned to use (insured against damage in transit) at the customer's expense and 
received by us in original  condition (with all product  packaging, documentation, and a  copy of the original  sales invoice)  within 14 
days of original invoice date. The RA number must be clearly stated on the shipping carton. Kits may not be returned for any form of 
refund or credit once the inner component packages have been opened or construction has been started.  

Components Return Policy 

Individually purchased components may not be returned for any reason. If you do not agree with this policy, please do not order. 

 

Содержание microBrute
















Отзывы: