Some products may not be available in your country, please contact our distributor for more details
Some products may not be available in your country, please contact our distributor for more details
13
6.OSD - Motion, Clear
14
MOTION
Motion control
AUTO FLIP
,
PROPORTIONAL PAN:
PARK TIME:
: Auto. image flip tilt range from 90° to
180°.
Depending on the zoom
factor, the dome will adjust the pan and tilt speed
automatically for comfortable viewing.
Defines the idle time prior to start a
custom defined action (park action).The duration can
vary from 1 to 240 minutes. This function can
bedisabled by setting the minute to 0.
PARK ACTION:
POWER UP ACTION:
FAN ENABLED
The action which will be started after
the idle time (park time). Selectable between Preset,
Scan, Pattern (Nr), Tour or None.
Action which starts after power
up and self test. Selectable between Auto, Preset 1,
Scan, Pattern (Nr), Tour or None. By selecting Auto,
the dome will resume the last action before power off.
: Defines the temperature limit (in °C)
at which the internal cooling starts operating. The
standard limit is 40°C.
AUTO FLIP
ON
PROPORTION PAN
ON
PARK TIME
000
PARK ACTION
NONE
POWER UP ACTION NONE
FAN ENABLED
040
BACK
EXIT
Clear
You can clear setting’s memory or reset the camera to
factory default. The follwing functions are supported:
- Clear all zones
- Clear all presets
- Clear all patterns
- Clear all tours
- Clear all windows
- Factory defaults
Warning
:
The clear action cannot be undone.
Once an item is cleared it is impossible to
retrieve the deleted setting. Please make sure
that the requested clear action is desired.
CLEAR
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL TOURS
CLEAR ALL WINDOWS
FACTORY DEFAULTS
RESTART
BACK
EXIT
6.OSD - Camera Setting
ADVANCE SETTING
AE MODE
AUTO
SHUTTER
N/A
IRIS
N/A
BRIGHT
N/A
WB MODE
AUTO
R GAIN
N/A
B GAIN
N/A
BACK
EXIT
Advanced Setting
Under the advanced setting, you can make
improvements tothe image quality depending on
different environmental conditions.
Auto Exposure mode. Depends on the light
condition in the surveillance area, you can set the AE in
different modes and adjust the parameters, such as
shutter speed, iris factor and brightness for the best
image quality.
White Balance mode, a
image improvement
based on DSP processing. You can also adjust the Red-
Gain or Blue-Gain to change the color tone.
Switch between 470-530 TVL (only
with FCB-1010P)
AE MODE:
WB MODE:
n
Hi-RESOLUTION:
ZOOM SPEED
HIGH
DIGITAL ZOOM
OFF
BLC MODE
OFF
SLOW SHUTTER
ON
IR CUT FILTER
AUTO
LINE SYNC
OFF
WDR MODE
OFF
ADVANCE SETTING
BACK
EXIT
CAMERA SETTING
Camera Setting
In the camera setting menu, you can access camera module
related settings. Please note that depending on module’s
capability, some functions may not be available. Please
contact your local sales representative for detailed
information.
Defines the speed whith which zoom
functions are performed.
Activates or deactivates the camera
module’s digital zoom function.
Selects the Back Light Compensation mode
which improves the image when an object has strong back
light.
Activates the Slow Shutter function of the
camera, which provides a higher light sensibility in low-lit
environments.
Enables the removal of Infrared Cutter
Filter (IRC), also known as “DAY/NIGHT” mode. Enabling
the IRC the camera turns into Black/White mode and has
higher sensibility to low-light situations or turns on the IR-
light depending on the light condition. Selectable between
On, Off or Auto. Only available on camera modules with IRC
function.
Enables and disables Line Synchronization.
ZOOM SPEED:
DIGITAL ZOOM:
BLC MODE:
SLOW SHUTTER:
IR CUT FILTER:
,
LINE SYNC:
