1..
Before connecting keyboard, please ensure Bluetooth adapter has completed installation or other
device with Bluetooth function has started normally.
2. Re-code, reference pairing steps.
3.
Ensure computer or other device has been paired with Bluetooth keyboard, if it can be use normally
in previous, and the keyboard in standby mode, simply click any key.
4
.Ensure the keyboard working normally, operating range is about 10 meters, it
’
s depend on the environment
may have changed.;
5
.Ensure that haven
’
t connect with other computer or Bluetooth device, if changed, should be re-paired
connection.
6
.If the keyboard can not connect due to too many Bluetooth device has connected, you can delete some
Bluetooth device you don
’
t need.
7
.Check the battery, if the red light blinks, it indicates low battery, please replace it.
FCC STATEMENT
1.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may cause undesired
operation.
2.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user
’
s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 or the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications, However, there is no guarantee that interference will not occur
in a particular installation. If the equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
--- Reorient or relocate the receiving antenna.
--- Increase the separation between the equipment and receiver.
--- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without RF striction.
