HT64
3.3. Screening mode for surface temperature measurement
The unit canwork in screening mode for surface temperature measurement.
1.Switch “Screening mode” option on in “Measure” menus(see § 6.4).
2.Set the Alarm temperature to appropriate value.
3.Set the Temperature compensation to appropriate value.
4.Switch “Center Spot” or “Temp. Max” on for surface temperature measurement.
5.
If
surface temperature
is higher than the set alarm threshold it will be shown in red color
in the lower part of the display
3.4. Capture/Save Images using the Internal memory
The unit can store 20 images on internal memory. The saved images can be
transferred to iOS,android and PC device throughBlueTooth.
1. Point the unit at an object or an area of interest.
2. Short press the trigger to capture the image; the image will freeze.
3. If don’t want to save the current image, Short press the trigger again,the image
will unfreeze.
4. Press“SAVE” to save the image
5. If the image is stored successfully on the internal memory, the image will
unfreeze.
6. To erase/format internal memory please refer to Section 6 Settings Menu.
3.5. Share images using BlueTooth
3.5.1. Instant share
For quick analyse and report the thermal images,Theunit has Bluetooth
instant share function, corresponding there are threesoftwares for iOS,Android.
1. Enable the Bluetooth on the thermal imager
2. Run Apps on smart devices, connect unit with smart device or PC(Detailed
referece to
Section 6.8 Settings Menu
).
3.Point the unit at an object or an area of interest.
4. Short press the trigger to capture the image; the image will freeze. And the “hold”
icon will display.
5. If don’t want the current image, Short press the trigger again,the image will
unfreeze.
