East SDD-150L, Инструкция по эксплуатации

Страница: 8 / 12

Connect power controller to the terminal on the machine, then connect the power
cord with power supply and make sure it is 208-240v single phase 60hz.
Turn power supply on to start the machine.
DAILY MAINTENANCE
1. Do shut down the power supply before maintenance.
2. Wipe the body with soft cloth in daily use. Use a wet hard cloth to wipe dirty
body, or use a soft cloth moistened with a little diluted neutral detergent.
3. Filter Cleaning: it will affect the dehumidifying effect or cause malfunction if
accumulate dust on filter , it needs to be cleaned regularly, clean it at least once a
month.Use dust catcher to remove dust or put filter into clean water (<40
℃
) to
wash, then place filter back after cleaning.
NOTE: The filter cannot be put in sunlight directly or roasted to avoid distortion.
The filter must be placed before power up machine.
4.
Non use of equipment :Cut the power or unplug power line. Place equipment in
dry and shaded area.
— 6 —
OPERATION GUIDE