- 7 -
Installation steps
：
1)
Please take out two groups of supports, assemble by embedding them with each other as shown
below.
2)
Place the two supports in parallel, then put the machine into two supports.
3)
It also can be placed horizontally if you like, please remember not to put the machine upside
down.
4)
Machine and battery pack, can be put together, as two ways are showed in the pictures below, the
battery pack should be put under the machine.
3. Panel function and operation
The operation is simple, operators only need to read the manual and follow the operation
instructions listed in this manual without any special training.
