East 6KVA, Руководство по эксплуатации

Страница: 18 / 37

15
The indicator status description is shown in the table below.
Indicator
No.
Function Description
①
Rectification Indicator
(green)
Light on: The rectifier is running.
Light off: The rectifier is out of operation.
②
Inverter Indicator
(green)
Light on: The inverter is turned on.
Light off: The inverter is out of operation.
Blink: The inverter is in standby mode.
③
Output Indicator
(green)
Light on: UPS has bypass/inverter output.
Light off: UPS has no output.
④
Bypass Indicator
(yellow)
Light on: UPS is powered by the bypass.
Light off: UPS is not powered by the bypass.
⑤
Battery Indicator
(yellow)
Light on: UPS is working in battery mode.
Light off: UPS is working in non-battery mode.
Blink: The battery voltage is low.
4.1.3 LCD screen
LCD panel view
The LCD display can be divided into 3 areas from top to bottom, which are “graphic display area”,
“numerical display and function setting area”, and “power level and operating mode display area”.
 Graphic display area:
 The load figures represent the load capacity. Each square represents the capacity of 25%.
 The fan icon will present rotating status without any corresponding meaning; the overload
icon will show up without any corresponding meaning.
 If pressing the mute button in battery mode or in fault and alarm mode, the buzzer icon will
blink. This icon will not show up under other circumstances.
 The fault icon will be lit up and blink in fault or alarm mode. This icon will not show up under
other circumstances.

Numerical display and function setting area:

The output information shows up. If operating left and right buttons, the input, battery, output,
load, alarm and fault codes will display successively (the fault codes are on the left, while
the alarm codes are on the right, please refer to the Chapter 5 “5.5 Fault Mode” for the
specific fault and alarm information).