Page: 7
p
7. Spar installed.
p
8. If you don't have someone to help you,
use 2 weighted objects to hold the wing
while installing the leading and trailing edge
carbon fiber strips.
p
9. Locate the full length carbon fiber strip
and prepare to apply it to the leading edge.
p
10. Mark a line on the leading edge at 8.5"
and glue from that point down to the
opposite wingtip.
p
11. Place the carbon fiber strip on the
leading edge, starting at the mark,
running the length to the opposite wing
tip, then spray with accelerator.
p
12. If the scab piece is too long, mark it
with a pencil as shown.
