5
Cot assembly (continued)
Page 4
6
Bed assembly
When assembling in bed mode:
1. Carefully pull the cot ends apart.
2. Attach the base to the top section of the cot ends as shown below.
When assembly has been completed, fully tighten all the bolts.
At the preferred height, attach the Base to the End panel using four Long bolts
and Barrel nuts using the Hexagon key.
Attach the remaining End panel to the Base using four Long bolts and four Barrel
nuts and the Sides using four Short bolts.
After assembly, fully tighten all fixings before use.
Bed end
CAUTION: The
Base must be
assembled the
right way up.
End panel
Base
x4 Long
bolt
x4 Barrel
nut
x4 Long
bolt
x4 Barrel
nut
