14
PDS-1/10G Portable Delay Simulator Chassis User's Manual
2.3 Chassis Components
Installing a Storage Drive
(FACTORY OPTION ON SOME MODELS)
The PDS-1/10G ships with one M.2 Flash Storage Drive. It contains the Linux operating
system and the proprietary code of the Network Emulator. Users are not allowed to access
this code. The only user access is the GUI interface and GUI Scripting.
Installing the Hard Drive (For Ref ONLY)
The motherboard should be installed before installing the drive.
1. Make sure there is no power to the system as described in section 2.1 and remove the
chassis cover.
2. Remove the screws securing the hard drive tray to the support bracket and set them
aside for later use. Lift the tray out.
3. Place the drive into the tray and secure it to the tray with the screws provided with drive.
Position for Second HDD
One HDD
Figure 2-2. Installing the Hard Drive