DS010
Issue 01
PLEASE BE ADVISED:
Before assembling the Dormer system for the first time, it is highly
recommended that Installers familiarise themselves with the component parts and carry out a test
assembly and disassembly in a safe area away from the point of final installation. All component parts
detailed in the operating instructions must be used in the assembly of the system. Should a piece be
missing or appear defective do not continue to assemble and contact Easi-Dec Immediately.
Step1 Step 2
Lay out the components ready for assembly.
Using 2 x 19mm spanners remove the standard Dec Struts and
replace with the Dormer Dec Struts supplied with the Kit.
Step 3 Step 4
Replace the wheels on the Platform with the Dormer Bars supplied
with the Dormer kits. Secure with two bolts and Wing Nuts.
Lay out the components ready for assembly
with the Platform against the wall with the Dormer Bars
on the ground ready for assembly. Identify the corresponding leg
for each side of the platform (Green – Left /
Red – Right)
Step 5 Step 6
Fit both Legs using the Pins and ‘R’ Clips provided and ensure that
the pins are inserted outside in, to minimise the risk of the ‘R’ Clips
being Knocked out.
REMEMBER:
Fit the Legs to the ‘Dormer use
only ’ hole Labelled on the underside of the platform.
Swing the Dec support struts and secure with
the Pins and ‘R’ Clips provided.
