15
3.7. POW ER ON/OFF
3.7.1. POWER ON
If the DVR is installed correctly and the switch is
set to “
ON
”
with the power light on, the DVR will
boot up automatically. Different models may have varying boot-up processes, please refer to the
Front Panel Introduction.
The DVR will detect all of the hardware connected to it when the power is turned
“
on
”
, the process
only takes approximately 20 seconds. After detection, the DVR will sound an alarm and enter into
multi-screen live view, which enables the user to start operation. Please refer to the Main Menu
Introduction or relevant instructions.
The Recording time includes the power-up time, because the DVR will automatically start counting
the recording when the power is switched on.
DIAGRAM 3-8 LIVE VIEW (OPERATION OF THE 4-CHANNEL DVR IS THE SAME AS THE 8-CHANNEL)
Note: The power supply must match the DVR, substituting is not recommended.
3.7.2. POWER OFF
Click on the SHUTDOWN button to turn off the DVR.
【
Main Menu
】
→
【
Shutdown
】
→
【
Shutdown
】
.