EAS Electric EMSS179AX, Инструкция по эксплуатации, Страница: 37 / 48

37
Use of automatic ice maker and water dispenser
¡Notices!
The water pipes are used in the pressure range of 30-100psi.
Water softeners may damage the ice maker and must not be used.
Please, check the ice pieces in the storage box when power-off above 1h. If the
ice pieces are thawing and binding together, please empty them, because the
bound ice pieces may cause failure of the ice system.
When the ice pieces in the storage box are binding together, you had better to
melt it with warm water rather than smash and take out them with a sharp tool,
which may damage the refrigerator.
Supply of cold water
1. Choose the ice/water button on the display board, and make sure
the water indicator turns on.
2.
When the water switch plate is pressed by the cup, the cold water
comes out.
3.
When using the refrigerator the first time, water does not come out
before the water tank in the refrigerator is filled up. The normal manner to
get water is pushing and holding the switch plate for 2-3 minutes.
4.
After the water comes out, please discharge water for about 3
minutes to purge the air and smell of plastic in the water pipe.
5.
When cold water is required, it's better to get some ice before
getting water.
6.
When getting water, it is normal for noise of valve operation.
Ice maker
V.1