EAS Electric EMRH608VRT-W, Инструкция по эксплуатации

Страница: 22 / 58

Hook the hood body

Open the panel.

Remove the Metal grease filter using the handles provided.

(Either) Hook the hood body to the bracket 20.
(Or) Hook the hood body to the screws 10 (5 x 50) at the points (2).

Level the hood body itself.
Wrong
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to
the chimney using either a flexible or rigid pipe
ɸ
150 or
ɸ
120 mm, the choice of which is left to the installer.

If to install a
ɸ
120 mm air exhaust connection, insert the
reducer flange 3 on the hood body outlet.

Fix the pipe 4 in position using sufficient pipe clamps
(not supplied).

Remove possible charcoal filters.
Right
Fix the brackets (Optional):

Drill at the marked points (1) (2) (3) , using a ɸ 10 mm drill bit.

Insert the Wall Plugs 11 into the holes (1) (2) (3).

Fix the hood fixing bracket 20 with 3 screws 10 (5 x 50) supplied with the hood.

Fix a Chimney fixing bracket 21 with 2 screws 10 (5 x 50) supplied with the hood.

Repeat this operation on the other side and on the vertical reference line,
checking that the three marks are leveled.

Mark a point (3) on the horizontal line C, 80 mm to the vertical reference line.

Repeat this operation on the other side , checking that the two marks are
leveled.
8 V.6