Cleaning and Maintenance
2
1
2
3
3
4
4
5
7
6
6
7
5
1. Place the flame spreader (4) on to the burner cup (5) so that the ignition
device and the flame supervision device extend through their respective
holes in the flame spreader. The flame spreader must click into
place correctly.
2. Position the burner lid (1, 2, 3) onto the flame spreader (4) so that the
retaining pins fit into their respective recesses.
Remove the burner lids and flame spreaders by pulling them upwards
and away from the top plate.
soak them in hot water and a little detergent or washing up liquid.
After cleaning and washing them, wipe and dry them carefully. Make
sure that the flame holes are clean and completely dry.
Wipe the fixed parts of the burner cup with a damp cloth and dry
afterwards.
Gently wipe the ignition device and flame supervision device with a
well wrung-out cloth and wipe dry with a clean cloth.
Before placing the burners back on the top plate, make sure that the
injector is not blocked.
Replace parts in the correct order after cleaning.
-
Do not mix up the top and bottom.
-
The locating pins must fit exactly into the notches.
BURNERS
Re-assemble the auxiliary, semi-rapid, rapid and triple-
crown burners as follows:
14
V.
3
Содержание EMH900CGB
Страница 10: ...Descripción del aparato 9 Modelo 900 510 99 EMH900CGB EMH900GBNX 860 510 90 V 3 ...
Страница 33: ...Description of the appliance 9 Model EMH900CGB EMH900GBNX 900 510 99 860 510 90 V 3 ...
Страница 56: ...Description de l appareil 9 Modèle EMH900CGB EMH900GBNX 900 510 99 860 510 90 V 3 ...
Страница 79: ...Descrição do dispositivo 9 Modelo EMH900CGB EMH900GBNX 900 510 99 860 510 90 V 3 ...
