How to Use the appliance
Automatic ignition with flame failure safety device
The appliance is fitted with a flame failure safety device on each burner,
which is designed to stop the flow of gas to the burner head in the event
of the flame going out.
To ignite a burner:
Press in the control knob of the burner that you wish to light
and turn it anti-clockwise to the maximum position.
If you keep the control knob depressed, the automatic ignition for
the burner will operate.
You should hold down the control knob for 15 seconds after the
flame on the burner has lit. If after 15s the burner has not lit, stop
operating the device and open the compartment door and/or wait at
least 1 min before attempting a further ignition of the burner. After
this 15-second interval, to regulate the flame you should
continue turning the control knob anti-clockwise until the flame is at
a suitable level. The operating position MUST be at a position
between the maximum and minimum position.
To switch the burner off, turn the control knob fully clockwise to
the gas off position.
In case of power failure, the burners can be lit by carefully using a
match.
11
V.
3
Содержание EMH900CGB
Страница 10: ...Descripción del aparato 9 Modelo 900 510 99 EMH900CGB EMH900GBNX 860 510 90 V 3 ...
Страница 33: ...Description of the appliance 9 Model EMH900CGB EMH900GBNX 900 510 99 860 510 90 V 3 ...
Страница 56: ...Description de l appareil 9 Modèle EMH900CGB EMH900GBNX 900 510 99 860 510 90 V 3 ...
Страница 79: ...Descrição do dispositivo 9 Modelo EMH900CGB EMH900GBNX 900 510 99 860 510 90 V 3 ...
