EAS Electric EMD141BI-V1, Инструкция по эксплуатации

Страница: 76 / 202

TROUBLESHOOTING TIPS
Before Calling For Service
Reviewing the charts on the following pages may save you from calling for
service.
Problem Possible Causes
What To Do
Dishwasher
doesn't start
Fuse blown, or
the circuit break
tripped.
Power supply is
not turned on.
Door of
dishwasher not
properly closed.
Water not
pumped
form
dishwasher
Twisted or trapped
drain hose.
Filter clogged.
Kitchen sink
clogged.
Check the drain hose.
Check coarse the filter.
Suds in the tub
Water pressure
is low
Replace fuse or reset circuit
breaker. Remove any other
appliances sharing the same
circuit with the dishwasher.
Make sure the dishwasher is turned
on and the door is closed securely.
Make sure the power cord is properly
plugged into the wall socket.
Check that the water supply is
connected properly and the water is
turned on.
Make sure to close the door
properly and latch it.
Check the kitchen sink to make
sure it is draining well. If the
problem is the kitchen sink that is
not draining , you may need a
plumber rather than a serviceman
for dishwashers.
Use only the special dishwasher
detergent to avoid suds. If this
occurs, open the dishwasher and let
suds evaporate. Add 1 gallon of cold
water to the bottom of the
dishwasher. Close the dishwasher
door, then select any cycle. Initially,
the dishwasher will drain out the
water. Open the door after draining
stage is complete and check if the
suds have disappeared. Repeat if
necessary.
Wrong
detergent.
26 V.2