8. Remove the side board and the grille.
Screw nut
Washer
Hanging screw bolt
Overhang part
Shockproof cushion
NOTE: Confirm the minimum drain tilt is
1/100 or more.
9. Mount the indoor unit onto the
hanging screw bolts with a block.
Position the indoor unit on a flat level
by using a level to prevent leaks.
Ceiling Installation
20mm
D. Refrigerant pipe
connection
(D.gas side)
Drain point
Downward slope between(1-2)/100
E. Refrigerant
pipe connection
(E. Liquid side)
Conduit
installation plate
Cord conduit
Side board
The conduit
installation
plate
screws
(not supply)
screws
(not
supply)
Conduit
installation
plate
Chassis
Hanging
Hanging arm
screw bolt
Wall-Mounted Installation
How to install the conduit installation
plate (if supplied)
1. Fix the sheath connector (not supply)
on the wire hole of the conduit
installation plate.
2. Fix the the conduit installation plate
on the chassis of the unit.
How to install the conduit installation
plate (if supplied)
1. Fix the sheath connector (not supply)
on the wire hole of the conduit
installation plate.
2. Fix the conduit installation plate on
the electric control box.
Electric control box
22
V.1