EAS Electric ECOFFE45, Инструкция по эксплуатации, Страница: 59 / 146

Setting the current time
In "READY" state, press Enter, select "DISPLAY" and press
Enter to enter. Navigate the options (CC/OZ, time) pressing
the + key or - key until the LCD displays "TIME". Press
B8 and LCD will display "--/--" with the hours number
flashing. Next press + key or - key to set the current hour.
Confirm the hour value by pressing B8. Now the LCD
displays "**/--" with the minute numbers flashing. Press +
key or - key to set the minute, then confirm by pressing
the "enter" key. The appliance will now run in this set time.
(Note: In the DISPLAY menu you can also change the
measuring unit (CC/OZ) following the same operation. If
you select CC, in screen the output coffee will be displayed
in "CC".)
Setting auto-start time (auto ON)
The machine will turn on automatically at a set time.

Make sure the current time has been set as described in
the previous chapter and that the machine is fully ready
(drip tray empty, water tank full and beans or pre-ground
coffee).
You can set the auto-start time following the same operation
as to setting the time. In "READY" state, press Enter, enter
"MENU" and select "AUTO ON". Press Enter and follow the
same steps as with "TIME" to set the time for the machine to
turn on.
Turn off the machine without turning off the knock switch
(A5) and this machine will automatically start at the set time
for auto ON.
CHANGING AND SETTING MENU PARAMETERS
After the appliance is "READY", select "MENU" or "DISPLAY"
and it will allow you to use the internal menu to modify the
following parameters and functions:
V.1 23