EAS Electric ECOFFE45, Инструкция по эксплуатации, Страница: 44 / 146

PRELIMINARY CHECKS
Controls after transport
After removing the packaging, make sure the product is
complete and undamaged and that all accessories are
present. Do not use the appliance if it is visibly damaged.
Contact Customer Services.
Installing the appliance
Important! When installing the appliance. respect the
following safety warnings:

Installation must be performed by a qualified profes-
sional in compliance with legislation in force in the
country of installation (see Built-in installation).

The packing elements (plastic bags. polystyrene foam,
etc.) should be kept out of reach of children as they are
a Safety hazard.

Do not install the appliance in rooms where the tem-
perature may drop to 0ºC or lower (the water in
the appliance could freeze and cause damage).

You should set the water hardness as soon as possible
following the instructions in the "Setting water
hardness" chapter.
Connecting the appliance
Danger! Check that the mains power supply voltage
corresponds to the value indicated on the appliance
rating plate. Connect the appliance to an efficiently
earthed and correctly installed socket with a minimum
current rating of 10A only. If the power socket does not
match the plug of the appliance, have the socket
replaced with a suitable type by a qualified professional.
To comply with safety directives, an rock switch with a
minimum contact distance of 3mm must be installed.
V.1 8