Earthworks CMK4 CloseMic Kit, Руководство пользователя

Страница: 9 / 16

7
Referring to Figure 6-B, notice that on the Delrin® cushioned rim-guide there
are two sets of grooves. One groove is in the “center” of the rim-guide (1),
while the other groove (2 & 3) is “off center” (or closer to the edge of the rim-
guide). These two sets of grooves provide you with “three” mounting options:
(A) using the “off center” rim-guide groove will place it closest to the drum
shell, (B) or rotating the “off center” groove 180 degrees will place the rim-
guide furthest away from the drum shell, and (C) the “center” groove will allow
placement in-between the positions (A) and (B).
Various types of metal drum rims have the bottom flange of the rim either
closer or further from the drum shell. One of the three positions (A, B or C
previously mentioned) will allow the RimMount™ bracket to be mounted par-
allel to the drum shell. Position the rim-guide so the bottom edge “flange” of
the drum rim fits comfortably into one of the RM-1 rim-guide grooves. This will
ensure that the cushioned rim-guide remains securely in place as you tighten
the thumbscrew to firmly secure the RM-1 to the drum rim. The soft protective
Polyolefin® coating on the RimMount™ bracket will prevent the possibility of
scratching the drum shell finish.
Soft Polyolefin® Coated
Metal Bracket
Rubber
Holder
Delrin®
Cushioned Rim-guide
Hook Portion
of Bracket
Thumbscrew
Figure 6-A. Elements of the RM1 RimMount™
Figure 6-B Positioning the Cushioned Rim-guide
Centered
Groove
1
Offset Groove
Positioned
on Left
Offset Groove
Positioned
on Right
2
3