For preparing seed beds, we recommend using one of
these tilling patterns (Fig. 6)
Tilling Pattern A
– Make two passes over area to be
tilled, the second at a right angle to the first.
Tilling Pattern B
– Make two passes over area to be
tilled, the second overlapping the first.
Before use, remove any visible stones or other foreign
bodies from the area.
CAUTION:
Before moving the tiller/cultivator from
one area to another switch off the motor and wait for
the tines to come to a complete stop. Be careful not to
let the tines touch the ground while moving the tiller/
cultivator. The tines as well as the unit itself may be
damaged even if the motor is switched off.
Clearing foreign objects:
During operation a stone or root could become lodged
in the tines, or tall grass or weeds may become
wrapped around the tine shaft. To clear the tines or
tine shaft release the trigger lever, wait for the tines to
come to a complete stop and unplug the tiller/
cultivator. Dislodge or remove the foreign matter from
the tines or tine shaft.
8
OPERATING
6
