This product must be correctly assembled before use.
Guide bar
(Fig. 1 inset)
Slide the lower section (6) into the handle (4).
Line up the holes on each tube, and make sure the cable
(A) is clear of the mounting holes.
Secure the two sections together with the supplied screw
and wing nut.
Motor housing
(Fig. 1)
Connect socket (B) to the plug on the motor housing (9).
Secure the housing with the supplied screws.
ASSEMBLY
7
Description
(Fig. 1)
1. Plug
2. Lock off button
3. Trigger
switch
4. Handle
5. Auxiliary
handle
6. Guide bar lower section
7. Discharge
chute
8. Auger
9. Motor
housing
