65 lb. Professional
Ice Melt Spreader
MODEL # 90365
ASSEMBLY INSTRUCTIONS
90365 65lb Ice Melt Spreader_M53107_113020
PAGE 2
Assembly Steps
STEP 1:
Open carton and remove the handle assembly, wheels,
and spreader from carton.
STEP 2:
Turn spreader upside-down on to the hopper.
STEP 3:
Ensure that the axle bushings are pushed into the
axle bearings on both sides as shown above.
Install drive wheel (both wheels are interchangeable) to axle
using pin hole nearest to
lower handles as shown. Insert 2”
cotter pin through wheel and through axle. Bend with pliers
to prevent pin from falling out.
STEP 4:
Install coast wheel to axle, then using outside pin hole
as shown, insert 1” cotter pin through axle (not thru the
wheel). Bend with pliers to prevent pin from falling out.
