MiniMe DSP P63 Manual 15
Room Correction Control
The iWoofer™ Pro app features auto-
matic room correction. To begin, select
“Room Correction” from the main menu.
Once there, select “Wizard” to begin the
automatic room correction process. Be-
fore beginning, ensure that the gain knob
is properly adjusted on the woofer and
that the sub is not over-driven.
iWoofer™ Pro will begin by taking a near
field measurement. Place the microphone
as close as possible to the subwoofer and
equal distance from the passive side. This
can best be done by placing the micro-
phone so that it is facing the side of the
subwoofer halfway between the active
and passive. After placing your mobile de-
vice in the proper location, select “Next”
to begin the sweep. It is important to re-
main silent during the sweeps. The sub-
woofer will now sweep through the fre-
quency range. Once completed, you will
be asked to add an additional response or
sweep measurement or you may con-
tinue. It is recommended to perform a
minimum of 3 response sweeps to get an
accurate measurement.
Once you have obtained the desired
sweeps select “No, Next” to continue to
the next step. You will be prompted to
select the reference type for the room
compensation, Boomy Region, Near Field
or Linear. We recommend the “Boomy
Region” selection since it maintains the
high energy peaks of the low frequencies
while creating a linear response for the
mid range. The Near Field option is ideal
for users with poor mic tolerance as it
measures relative SPL and only compen-
sates for the room reflection. The final
reference, Linear, creates as flat as a re-
sponse curve as possible throughout the
frequency range.
ROOM TUNING WITH iWoofer
™
After the desired option is selected,
iWoofer™ will then instruct you to place
the mic in your typical listening position.
Once the mic is placed, click “Next”. The
iWoofer™ Pro app will then proceed to
sweep again. As before, we recommend
performing at least 3 response sweeps.
Click “No, Next” when you have concluded
your response sweeps and iWoofer™ will
proceed to make the necessary adjust-
ments to your subwoofer’s response.
