EarthQuake MC33 Скачать руководство пользователя страница 20

20

Owner’s Manual

MC33 2-CYCLE CULTIVATOR 

Get parts online at  

www.GetEarthquake.com 

or Call 

800-345-6007 

M-F 8-5 CST

DETHATCHER KIT INSTALLATION (OPTIONAL 

ACCESSORY)

IMPORTANT

THE  DRAG STAKE MOUNT KIT IS REQUIRED TO USE THE 
DK43 DETHATCHER KIT.

The Dethatcher Kit is very effective for lifting away the  

excessive matted layers of thatch that can prevent moisture, 

oxygen and nutrients from penetrating the soil and can harbor 

disease and insects. Use in Spring, Summer, and Fall to bring 

life and color back to your lawn.

1.  Flip the ON/OFF switch to the OFF or STOP position. Re-

move the cultivating tines or other working tools, and the 

drag stake.

2.  Unscrew mount bolts/nuts that connect the wheel bracket 

to the drag stake mount and set wheel bracket aside. SEE 

FIGURE 14.

3.  Slide dethatcher shield over the unit’s tine shield from 

the rear of the unit and secure using bolts and nuts. SEE 

FIGURES 14 AND 15.

4.  Secure the lower part of the dethatcher shield to the drag 

stake mount using the lock pin. SEE FIGURE 15.

5.  Install wheel extension plate using additional bolts and 

nuts. Make sure wheel extension is facing the correct 

direction. (The side, with the two holes flush to the edge, 

connects to the drag stake mount). SEE FIGURES 14 AND 

15.

 

a. Attach the wheel extension to the drag stake mount 

 

    with mount bolts and nuts from unit. 

 

b. Attach the wheel bracket to the wheel extension with 

 

     bolts and nuts included with the Dethatcher Kit.

6.  Slide the left and right Dethatcher assemblies onto the 

tine shaft making sure the right assembly is installed on 

the right side and left assembly is installed on the left side 

as defined from the user’s position. SEE FIGURE 14.

7.  Secure dethatcher assemblies using the hairpins. The hair-

pins go through the inner holes of the tine shaft. 

SEE FIGURE 14. 

NOTE: A drag stake should not be used when using the 

dethatcher kit.

FIGURE 15 

FIGURE 14 

LEFT  

DETHATCHER 

ASSY

DETATCHER 

SHIELD

RIGHT  

DETHATCHER ASSY

HAIRPIN

LOCKPIN

SHIELD SECURED 

WITH LOCKPIN AND 

TINE SHIELD BOLTS

TINE SHAFT

WHEEL BRACKET

ASSY

Содержание MC33

























Отзывы: