EarthQuake MC33 Скачать руководство пользователя страница 13

13

Owner’s Manual

MC33 2-CYCLE CULTIVATOR 

Get parts online at  

www.GetEarthquake.com 

or Call 

800-345-6007 

M-F 8-5 CST

  WARNING

  MAKE SURE THE UNIT IS IN A STABLE POSITION BEFORE 

PULLING THE STARTER HANDLE. 

  WHEN THE UNIT STARTS TO FIRE OR RUN, RETURN  BOTH 

HANDS TO THE HANDLE BAR POSITION TO MAINTAIN 

CONTROL AND STABILITY OF THE UNIT.

 STARTER ROPE CAN CAUSE AN UNANTICIPATED JERK 

TOWARDS ENGINE. PLEASE FOLLOW INSTRUCTIONS TO 

AVOID INJURY.

 NEVER LEAVE ENGINE RUNNING WHILE UNATTENDED. 

TURN OFF AFTER EVERY USE.

 NEVER CARRY CULTIVATOR FROM ONE LOCATION TO 

ANOTHER WHILE ENGINE IS RUNNING.

  ALWAYS WEAR A PROTECTIVE HEARING DEVICE.

 DO NOT START ENGINE IF FUEL IS SPILLED. WIPE OFF 

EXCESS FUEL AND ALLOW TO DRY.

  WARNING

 PRACTICE SAFETY AT ALL TIMES. ENGINE MUST BE 

TURNED OFF AND ALLOWED TO COOL, AND SPARK PLUG 

WIRE MUST BE DISCONNECTED BEFORE ATTEMPTING ANY 

MAINTENANCE OR REPAIR. 

TO PREVENT ACCIDENTAL STARTING:
• 

ENGINE MUST BE TURNED OFF AND COOL, AND SPARK 

PLUG WIRE MUST BE REMOVED FROM SPARK PLUG 

BEFORE CHECKING AND ADJUSTING ENGINE OR 

EQUIPMENT.

• 

TEMPERATURE OF MUFFLER AND NEARBY AREAS MAY 

EXCEED 150° F (65° C). AVOID THESE AREAS.

• 

CHECK CULTIVATOR OFTEN FOR LOOSE NUTS AND BOLTS. 

KEEP THESE ITEMS TIGHTENED.

• 

NEVER STORE ENGINE WITH FUEL IN THE TANK INSIDE 

A BUILDING. POTENTIAL SPARKS MAY BE PRESENT FOR 

IGNITION OF FUEL AND FUEL VAPORS.

• 

AN ADULT MUST ALWAYS DO MAINTENANCE AND REPAIR 
ON ENGINE AND CULTIVATOR.

• 

ENGINE MUST BE SHUT-OFF, COOL, AND SPARK PLUG 
WIRE REMOVED BEFORE ANY REPAIR OR MAINTENANCE 
CAN BE DONE.

WARM/HOT ENGINE START:

1.  Begin with Step 

6

 of Cold Engine Starting.

2.  If engine does not fire, refer to Step 1 of Cold Engine  

Starting.

Note: If engine fails to start after trying starting  

procedures, please contact our customer service  

department at 800-345-6007.

DO NOT attempt to start engine in the following ways:

• 

DO NOT use starting fluid.

• 

DO NOT spray flammable liquids or vapors into air    

 

cleaner, carburetor or spark plug chamber.

• 

DO NOT remove spark plug and attempt to start en-  

 

gine. Flammable fuel can spray out & ignite from a 

 

spark from spark plug.

FIGURE 5

RUN  

POSITION

FUEL PRIMER

BUTTON

CHOKE 

POSITION

PRIMER

BULB

ON/OFF

SWITCH

RECOIL

HANDLE

Содержание MC33

























Отзывы: