Page 8
For technical questions, please call 1-888-866-5797.
Item 56774
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
S
E
tup
Workpiece and Work area Set up
1. Designate a work area that is clean and well lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
3. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
General instructions for use
1. Make sure that the Trigger is in the
off-position, then attach the Battery Pack.
2. Prime Gun by simultaneously squeezing the Trigger
and pressing the Air Valve to expel any air pockets.
3. If grease will not flow, then air pockets likely remain:
a. Pull back on the Follower Rod Handle until
the Follower Rod is fully extended.
b. Press Air Valve while pushing Follower
Rod back into Grease Tube.
4. Clean the grease zerk fitting carefully and
completely with a clean cloth prior to attaching
the Grease Gun’s Coupler onto the zerk fitting.
5. Attach the Coupler by pressing it straight
onto the clean grease zerk fitting of the
object to be lubricated. Make sure that the
Coupler is fully seated on the zerk fitting.
WarninG!
tO rEDucE tHE riSK OF SEriOuS
inJury FrOM inJEctiOn:
It may be necessary to hold the Coupler in place on
the zerk fitting while lubricating.
Hold the end of
the hose by the spring guard only. Keep hands
away from exposed rubber part of hose.
6. Squeeze the Trigger several times or
until a small amount of grease begins
to flow out of the greased bushing.
7. Remove the Coupler from the grease zerk fitting,
and wipe any excess grease from the exterior
of the grease zerk fitting, Hose, and Coupler.
cautiOn! tO prEVEnt inJury FrOM
tOOL Or accESSOry FaiLurE:
Do not exceed the tool’s
maximum air pressure rating.
If the tool still does not have sufficient force
at maximum pressure and sufficient airflow,
then a larger tool may be required.
WarninG!
The tool will restart automatically if stalled.
8. To prevent accidents, turn off the tool and
remove its Battery Pack after use. Clean, then
store the tool indoors out of children’s reach.
