ARO-300 Overview
1.
Green LED
Illuminates when 3.5mm line in mode is enabled. Green and red LED lights will flash
when factory reset is initated.
2.
Blue LED
Illuminates when Optical In is enabled.
3.
Red LED
Illuminates when WiFi mode is enabled and flashes when in pairing mode.
4.
LAN Connector
This connector allows you to hard wire the ARO-300 module to a local WiFi router for
faster internet access. This will bypass the WiFi setup process.
5.
Optical In
Allows you to connect the ARO-300 to devices that offer an Optical Output.
6.
USB Port
Used for connecting a USB drive for music storage on the ARO-300 module.
7.
Audio Output
Use 3.5mm jack to connect the ARO-300 module to an amplifier or powered speakers.
8.
Audio Input
Allows you to connect the ARO-300 to devices that offer a Line Output.
9.
WPS Button
Press and hold this button for two seconds to pair the ARO-300 module to the local
router. Hold for 8 seconds to reset to factory settings and the red and green LED lights
will flash.
10.
Micro USB Port
This 5V (2A) USB input is used to power the ARO-300.
ARO-300 Manual 5
Specifications are subject to change without notice
