10
CLEANING INSTRUCTIONS FOR YOUR SPRAY GUN
TYPE OF MATERIAL
CLEANING
Water-based material
Clean with water
Oil-based material
Clean with mineral spirits, rinse with water
Lacquers
Clean with lacquer thinner, rinse with water
BASIC CLEAN - AFTER EVERY USE & CHANGES OF MATERIAL COLOUR
• Open paint container and pour any left over material from the Pro-8™ gun cup back into its
container so that it can be used for the future. Pull the trigger to allow material to run out of the
pick-up tube.
• Pour a quantity of the appropriate cleaning solution into the cup, shake the spray gun lightly,
reassemble the spray gun, then spray through the spray gun. Repeat this process until the
appropriate cleaning material being sprayed is coming through clear. Repeat this with warm soapy
water and leave to dry.
• Clean paint container seal.
DEEP CLEAN - BEFORE STORAGE
• Perform basic clean
• Unscrew Air Cap Ring.
• Remove Air Cap.
• Using a 13mm wrench or socket remove the Fluid Tip.
• Place all of these items into a container and clean, using a brush and appropriate thinners.
• Clean the inside of the body of the Spray Gun.
• Rinse gun body and all components with warm soapy water to remove trace of thinners.
• Leave the gun body and components ventilated to thoroughly dry.
• Reassemble parts.