E&R Classic KPN5000, Руководство пользователя

Страница: 17 / 24

14
Machine Setting
Stitch Stitch selector
Zig Zag
foot
Top thread tension
control 1 to 4
Stitch length control
any number (not
necessary to adjust)
Darning plate
Use the darning plate for button sewing. (See page 10 )
To strengthen the shank, cut the
threads leaving a 20 cm (8" ) tail .
Bring the needle thread down
through the hole in the button and
wind it around the shank.
Draw the thread to the wrong side
and knot.
A pin can be placed on top of the button to form a shank.
Set the stitch selector at " ". Align the both holes of the button with
the slot of the foot and place the left hole of the button just below the
needle point. Lower the foot and turn the pattern selector until the
needle point comes just above the right hole of the but ton. Sew about five
stitches and raise needle. Set t he stitch selector at " " again and sew a
few st itches to lock thread.
Sewing Buttons
PDF created with pdfFactory trial version www.pdffactory.com