January 2013
Rev A
Shown below is the rear of the unit. There is an air exhaust and the AC input block.
Chapter 4 Safety:
Do not attempt to operate this unit with the cover removed. High AC and DC voltages
are present. The cover protects against electrical shock due to AC line voltages, high
DC and RF fields. Further the cover provides part of the cooling system design.
Components, are prone to over-heat and eventual failure if the unit is operated without
the cover in place.
Ensure that the load is connected to the output prior to connecting the RF input to the
unit. This will prevent high voltages being present and exposed at the output connector.
Only use the AC cord provided or equivalent.
Ensure that the mains outlet is properly grounded.
