The material contained in this document is the property of Electronics & Innovation Ltd., it is subject to
change without notice.
May 2019 Revision C
3
Chapter 1 Introduction
The 1000S04 is a broadband solid state amplifier covering the frequency spectrum from
20 to 400 KHz. It is rated at 1000 watts of RF power with low harmonic and
intermodulation distortion. A Class D design, the 1000S04 will amplify inputs of AM, FM,
SSB, pulse and any complex modulation signals within the bandwidth of the amplifier.
The amplifier has 60 dB gain, it is unconditionally stable and will not oscillate even with
combinations of mismatched source and load impedance. It is protected against failure
due to output load mismatch and/or overdrive.
1.2 INSTRUMENTATION IDENTIFICATION
Each amplifier is identified by a serial number tag on the back panel of the unit. Both the
model number and the serial number should be quoted to identify specific unit.
1.3 SPECIFICATIONS
Physical and electrical specifications are listed in Table 1-1 below
