EagleVision ERS-USB-DVR, Руководство по эксплуатации

Страница: 26 / 85

EagleVision ERS-USB-DVR Operation Manual V5.0
Y ] ٛ
you must notify it to your network manager for these changes.
(Please inquiry details to your network manager.)
Use Web Cam Server
Even if you have no client program at the remote site you can watch images to using a
web browser. Check “Web Cam Server” for this function.
The value of default port is 80, but the user can change the value of the default port. If
there is no display of the image, due to the firewall.(The remote user can connect the
webcam server to the recorder without the network administrator authorization.
Note:
For broadband T1 and Dial up Connection. The user sets up the frame rate according to
the communication speed of the on line connection. The maximum number of frames that
can be viewed is 30fps. The higher the fps the more CPU resources will be needed from
the server. Therefore, the user can adjust the fps speed of upload from 1fps for PSTN Dial-
up modem or less than 300Kbps, 2fps for 512Kbps and 30fps for 10Mbps on the basis of 4
channels.
ೈ
If you used WebAgent when you changed Web Server Port, WebAgent should be
reinstalled.
Viewer
When the user is monitoring the image through web browser, the user must set up the IP
address of the server and port number, through the Webcam Sever set up port. If Webcam
Server set up default port, that is Web server port, so you could insert just IP Address on
w e b b r o w s e r . F o r e x a m p l e , e n t e r “ http://192.168.10.99 ” o r
http://192.168.10.99/html/index.html on the location window of the web browser.