FUNCTIONS
Front Control Panel
1
Scanners: Selects any or all of 12 fixtures.
2
Scenes: Stores or runs scenes.
3
LCD Display: 4-digit showing values and chosen settings.
4
Bank (up and down): 30 banks are available for selection.
5
Chases: Selects 1~6 chases.
6
Blackout: Disables all channel outputs.
7
Program: Activates the program mode. Display blinks
when activated.
8
MIDI/Add: Controls MIDI operation or activates the save
function.
9
Auto/Del: Selects Auto run in chase mode or deletes
scenes and/or chases.
10
Music/Bank Copy: Triggers sound activation in Chase
mode or copies a bank of scenes from one to another in
Program mode.
11
Tap SYNC/Display: In Auto Chase mode, used to change
the rate of chase and, in Program mode, changes the
LCD display value.
12
Fade Time Slider: Adjusts the Fade Time. Fade Time is
the time it takes the DMX Discontrol 192 to completely
change from one scene to another.
13
Speed Slider: Adjusts the rate of the chase speed in Auto
Mode.
14
Page Select: Selects page A for channel 1 to 8, or page B
for channel 9 to 16.
15
Faders (1-8): Adjusts the output level from 0~255 or the
intensity from 0%~100% of each channel.
Rear Control panel
• MIDI in: Receives MIDI data.
• DMX Polarity Select: Verify the polarity of your fixture and
set the DMX Discontrol 192 to the proper polarity.
• DMX Output: Sends DMX signal to fixtures or packs.
• DC Input: Plug a DC 9~12V, 300mA minimum power supply in.
SCANNERS
1
1
1
2
2
3
3
13
4
4
14
5
5
15
6
6
16
Page
Select
Page A
Page B
Program
30s
0s
0.1 sec
10 min
Chase
Blackout
Step
Program
Music trigger
Auto trigger
Scene
Bank
Chase 1
Bank
Chase 2
Chase 3
Chase 4
Chase 5
Chase 6
Blackout
Midi/Add
Auto/Del
Music
Bank-copy
Tapsync
Display
7
7
8
8
2
3
4
5
6
7
8
9
9
10
10
11
11
12
12
SCENE
STEP/TIME
SPEED
FADE TIME
Please read these instructions carefully before use.
INTRODUCTION
Thank you for purchasing the DMX Discontrol 192.
The DMX Discontrol 192 is a standard universal DMX 512
controller, controlling up to 192 DMX channels.
Its main features are as follows:
12 fixtures of up to 16 channels.
30 banks of 8 scenes, each for a total of 240 scenes.
6 chases, each up to 240 scenes.
8 faders adjusting the DMX output level from 0~255.
2 faders controlling chase speed and fade time.
MIDI control through MIDI interface.
Built-in microphone.
Blackout.
www.eagletone.com
1
eagletone.com
User’s manual
EAGLETONE DMX DISCONTROL 192
1
user’s manual
