manualshive.com logo in svg

Eagle VeriLock, Руководство пользователя, Страница: 11 / 20

Поделиться
Скачать
Eagle VeriLock Скачать руководство пользователя страница 11

Finishing and General Care - continued

Masking Casement and Awning Window Sensors

If the lock bezel and lock lever are removed prior 

to finishing, fill the bezel opening with a protective 

mask such as painter’s tape, 

paper towel or 

foam.

Side Stop

Masking Double-Hung and Single-Hung Window 

Locks and Sensors

Mask the entire sash lock assembly including 

the locking mechanism on the outside edge with 

painter’s tape prior to finishing.

Interior View

Interior View

Sash

Lock

Assembly

Painter’s

Tape

Locking

Mechanism

Mask the sliding door keeper and sensor plate on the 

side jamb with painter’s tape prior to finishing.

Painter’s

Tape

Keeper

Side

Jamb

Interior View

Sensor 

Cover

Plate

Masking Hinged French Door Strike and Sensor

Mask the hinged door center strike plate and sensor 

on the side jamb with painter’s tape prior to finishing.

Painter’s

Tape

Center

Strike Plate

Side

Jamb

Interior View

Masking  Sliding Door Keeper                               

and Sensor Cover Plate

Sanding, staining, painting, varnishing and other 

finishing procedures should always be done in well-

ventilated areas.  Follow all manufacturer’s 

instructions.  Failure to do so may result in injury or 

illness.

Finish wood surfaces immediately after installation. 

Unfinished wood will deteriorate, discolor, and/or 

may bow and split.  Do not stain or paint hardware or 

its components.  Product damage may occur.

User’s Guide

11

Содержание VeriLock





















Отзывы:

Нет отзывов