Eagle Map Guide Скачать руководство пользователя | Manualshive

Страница: 53 / 70

background image

48

A screen similar to the one at right appears.

Now enter the correction for your location. Remember,
this is the difference between the location shown on
the present position display and the position shown on
the chart. In this example, we entered 0 degrees, 0.047
minutes north latitude and 0 degrees, 0.244 minutes
east longitude. That is the difference between the
present position shown by the Map Guide and the one
on our chart.

After you’ve entered the latitude/longitude correction,
press the ENT key to accept it. The Map Guide erases
the PCF entry screen and returns to the navigation or
mapping screens with the correction factor applied.

POSITION PINNING
When using a GPS receiver at extremely low speeds,
it can have trouble determining your course over
ground, or direction you’re travelling. This is due in large
part to SA, or selective availability. SA is small inaccuracies purposefully
put into the GPS satellite’s signal by the government. This cause wide
variations in the track display and other navigation displays when using
the unit at slow speeds.

If you’re using this receiver without DGPS and stop, the position pinning
feature locks the present position indicator on the plotter until you’ve moved
a short distance or exceed a very slow speed. This prevents the “wander-
ing” plot trail seen when you’re stopped with position pinning turned off.
This also affects the navigational displays.

The easiest way to see the effects of S/A is to stand still with the GPS
receiver turned on and watch your plot trail with position pinning turned
off. You’ll see the present position change, speed increase and decrease,
and a random plot trail on the plotter’s screen.

If you wish to turn the position pinning feature off, press the MENU key,
then highlight the “GPS Setup” label and press the right arrow key. Now
highlight the “Pinning” label. Finally, press the left arrow key.

«
...
51
52
53
54
55
...
»

Содержание Map Guide







































































Отзывы:

Нет отзывов

Похожие инструкции для Map Guide

Бренд: Racelogic Страницы: 2

Бренд: Garmin Страницы: 78

Бренд: Raymarine Страницы: 67

Бренд: SunTech Страницы: 30

Apollo SL50 GPS

Бренд: II Morrow Inc. Страницы: 62

Бренд: Fullpower Страницы: 31

Voxtrack GPS300

Бренд: Voxson Страницы: 1

Amber Swift A100

Бренд: amber connect Страницы: 6

Бренд: amber connect Страницы: 15

GPS tracker device

Бренд: Amber Alert GPS Страницы: 27

Бренд: Loc8tor Страницы: 6

Бренд: Qstarz Страницы: 2

Бренд: Qstarz Страницы: 2

Бренд: Qstarz Страницы: 2

Бренд: Qstarz Страницы: 2

Бренд: Qstarz Страницы: 19

Бренд: TAG Страницы: 8

Бренд: saphe Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды