IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the product for future
reference.
BEFORE USE
You must inspect the luminaire including its cable for any signs of damage. If the product is
damaged, DO NOT use it, and contact your supplier immediately.
INSTALLATION
Remove the fixing bracket from the body of the luminaire.
Attach the fixing bracket to a wall or post, using screws and, if necessary, wall plugs.
Fit the body of the luminaire into the fixing bracket.
Connect the luminaire to the electricity supply using the lead provided.
• Brown = live
• Blue = neutral
• Green/yellow = earth
• The luminaire must be earthed.
If mounting outdoors then make sure that the connections are adequately waterproofed.
OPERATION
At dusk, the light sensor on the base of the unit will detect the reducing light and will automatically
switch the light on. At dawn the sensor will detect the rising light levels and the unit will automatically
shut off.
GENERAL SAFETY REQUIREMENTS
• All electrical work must be carried out to the requirements of the latest edition of the IEE wiring
regulations (BS7671).
• Domestic wiring must be tested periodically by a qualified electrician at least once every 10 years
or at every change of occupancy.
DISPOSAL AND RECYCLING
You must not dispose of this luminaire with domestic household waste.
Most local authorities have specific collection system for appliances and disposal is free of charge
to the end-user.
When replacing an existing luminaire with a similar new luminaire your retailer may take the old
luminaire for disposal.
