Eagle KEE E15, Руководство оператора

Страница: 29 / 108

E15h SPRAYER- Sprayer Setup Operation
3.11 SET A MANUAL SPEED
• Press MENU
• Press ENTER to select SETUP
• Press ENTER to select SPRAYER SETUP
• Press Dec (down arrow), the screen advances to SPRAYER SETUP 2
• Press LINE 1 until focus is on MANUAL SPEED
• Press ENTER,
An asterisk (*) will appear after MANUAL
• Press INC/DEC buttons to set the manual speed. A value of OFF and
number between 1 kph and 40kph can be set.
• Press ENTER, to accept changes
Note: The manual speed will not be able to be set if there is a valid speed
source present, this can only be done whilst the vehicle is stationary. As soon as
a valid speed is present this will override the manual speed. This value is not
saved in memory, if the console is turned OFF the ‘Manual Speed’ value will
need to be re-entered
3.12 SET RATE INCREMENT
Note: The units displayed will be (L/Ha or L/100m), for the rate increment, this
will depend on whether ‘L/Ha’ or ‘L/100m’ was selected for the APPL’N MODE.
See Section 3.7.
• Press MENU
• Press ENTER to select SETUP
• Press ENTER to select SPRAYER SETUP
• Press Dec (down arrow), the screen advances to SPRAYER SETUP 2
• Press LINE 1 until the focus is on RATE INCREMENT
• Press ENTER.
An asterisk (*) will appear after RATE
• Press INC/DEC buttons, to set RATE INCREMENT value.
Rate increment values changes in 1 (L/ha or L/100m) increments.
• Press ENTER to accept the changes
3.13 SET THE NUMBER OF BOOM SECTIONS
Note: This sets the number boom sections and the configuration of boom
sections to suit the sprayer configuration being used.
When 2 sections are selected then ‘Left Inner’ and ‘Right Inner’ section switches
are enabled.
When ‘3L’ sections are selected then ‘Left Outer’, ‘Left Inner’ and ‘Right Inner’
section switches are enabled.
When ‘3R’ sections are selected then ‘Left Inner’, Right Inner’ and ‘Right Outer’
section switches are enabled.
When ‘4’ is selected then the ‘Left Outer’, ‘Left Inner’, ‘Right Inner’ and ‘Right
Outer’ section switches are selected
• Press MENU
• Press ENTER to select SETUP
• Press ENTER to select SPRAYER SETUP
• Press Dec (down arrow), the screen advances to SPRAYER SETUP 2
• Press LINE 2, until the focus is on BOOM SECTIONS.
The focus window displays
the number of sections and sprayer configuration currently selected.
• Press ENTER to set the number and configuration of BOOM SECTIONS.
An asterisk (*) will appear.
• Press INC/DEC buttons, to select between ‘2’, ‘3L’, ‘3R’ and 4 SECTIONS
• Press ENTER to accept the changes
29
V 1.0 11/05